1*2 FBT Coupler
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
FBT Coupler
The FBT splitter(Fused Biconical Taper splitter) is a passive device that divides an input optical signal into unequal portions, and then send out the divided signal to separate users. FBT technology has become mature after developing for about 20 years. The FBT splitter has been widely used in FTTx systems, MANs, WANs, CATV and active devices.
Our FBT single mode splitter has wide bandwidth, suitable for incoming signals with wavelengths ranging from 1260nm to 1650nm. This range of fiber optic splitter has a small physical size, available in different packages.
Advantages:
1.This type of FBT splitter is built to the Telcordia GR-1209-CORE and Telcordia GR-1221-CORE standards. It is interchangeable with many other optical fiber splitters made to the same standards.
2.Low insertion loss
3.High reliability
4.Meet the IEC and ROHS requirements
Applications:
1.CATV
2.Active devices
3.Optical fiber communication system
4.LANs, WANs
5.Telecommunication network
6.EPON/GPON
7.FTTx
Specifaction
Parameter | Specifications | Unit | |||||||
Optional center wavelength | 630,850,980,1060,1300 | nm | |||||||
Split ratio type | Equally Splitted | / | |||||||
Port type | 1x2,2x2 | 1x3 | 1x4 | 1x8 | 1x16 | / | |||
Insertion loss(50/125µm) | =4.9 | =6.7 | =7.8 | =11.5 | =15.0 | dB | |||
Insertion loss(62.5/125µm) | =4.6 | =6.4 | =7.5 | =11.0 |
| dB | |||
Additional loss | =0.15 | dB | |||||||
Polarization dependent loss | =0.20 | dB | |||||||
Directivity | =40 | dB | |||||||
Operating Temperature | -40~+85 | ? | |||||||
Storage temperature | -40~+85 | ? | |||||||
Bare fiber package dimension | F3x60 | F3x60 | F3x60 | F3x60 | F5x60 | mm | |||
0.9mm Loss tube package dimension | F3x60 | 100x12x8 | 100x12x8 | 100x12x8 | 135x100x10 | mm | |||
2.0 mm or 3.0mm loose tube packagedimension | 100x12x8 | 95x75x6 | 95x75x6 | 130x100x6 | 130x100x8.5 | mm | |||
Multimode 1x2 Splitter | |||||||||
Split Ratio | Insertion loss(dB) 50/125µm | Insertion loss(dB)62.5/125µm | Unit | ||||||
40/60 | 6.5/4.5 | 5.8/3.6 | dB | ||||||
30/70 | 8.0/3.9 | 7.0/2.9 | dB | ||||||
20/80 | 9.8/3.2 | 9.0/2.4 | dB | ||||||
10/90 | 13.5/2.7 | 12.5/1.9 | dB | ||||||
5/95 | 17.0/2.4 | 16.5/1.5 | dB | ||||||
1/99 | 22.1/1.4 | 22.0/1.1 | dB |
Note: All parameters above are for FBT splitters without connectors.
Well-known as one of the leading 1*2 fbt coupler manufacturers and suppliers in China, Inte Technology is equipped with advanced technology and many highly qualified staff. Please be free to wholesale the customized products with us.
- GJFJV 24C Fiber Cable 1 Pieces / (Min. Order)
- GJFJV 12C Fiber Cable 1 Pieces / (Min. Order)
- GJFJV 4C indoor Fiber Optic Cable 1 Pieces / (Min. Order)
- GJFJV 3.0mm Fiber Cable 1 Pieces / (Min. Order)
- 24C SC Port Wall Mout Box 1 Pieces / (Min. Order)
- 12C SC Port Wall Mout FTTH Box 1 Pieces / (Min. Order)
- MPO/MTP-MPO/MTP12C OM3 LSZH 3.0mm 1 Pieces / (Min. Order)
- ODVA(MPO/MTP)-LC & Sengko fiber optic jumper outdoor waterproof connectors,Outdoor base station optical fiber cables 1 Pieces / (Min. Order)
- IP68 Outdoor Waterproof fiber Connector ODVA(SC )-SC Patch Cables 1 Pieces / (Min. Order)
- ODVA Armored Fiber Optic Patch Cord IP68 Waterproof Suitable For Outdoor 1 Pieces / (Min. Order)
- FullAxs-LC/UPC 8core Fiber to the Antenna Cable Assemblies outdoor use Water proof dust proof and corrosion resistant 1 Pieces / (Min. Order)
- FullAxs-LC/UPC 4.8mm Outdoor FTTA Waterproof Optic Fiber Patch Cord fiber to the antenna ftta 1 Pieces / (Min. Order)
- IP65 Outdoor Waterproof Fiber Optic Connector FullAxs-LC/UPC 4.8mm for BBU RRU 1 Pieces / (Min. Order)